A laser printer cartridges in comparison Jiaoqi components, when the cartridges have glare, the photosensitive drum surface exposure, exposure of the fixing process can attract toner imaging, but a certain point, after all, cartridges were exposed time and The number is limited, particularly long period of continuous exposure of the cartridge would be more serious damage. So please do not make cartridges directly exposed to sunlight or other strong light source, the replacement cartridges should be completed quickly as possible, to avoid being strong light.
When the cartridge is removed from the printer, they should immediately put it into the box or the use of translucent material to the poor wrapped up, the cartridge-plate is used to block the external light shielding to protect sensitive cartridge Surface, so as not to block the open cartridge-board. If the cartridge in a lower temperature while in transit, then it should be placed in the first temperature suitable place at a certain time and temperature return to room temperature, again using.
In addition, attention should be paid to clean up the printer's regular channel input and output channels and reduce the excessive dust into its internal, long time not to use, it can also open the machines within the cartridge and cleaning work, such as dust can reduce congestion And the probability of cardboard, can also ensure that the printer within the normal operation of transmission components, parts and components to reduce wear and tear.
|
